Page 1 of 1

Different outcome with the same settings

Posted: Sat Sep 23, 2017 7:00 am
by swissdude
Hi to the Group, has beena while - i am happy with the Software :)

One thing i cant get right, i have LED lights under an angle that should shine down the wall.

The same color light is the same material - so the same settings.

also the hardware is the same, size, dimensions... but the outcome is wierd.

I would like the soft fade as on the small wall to the front.

Thansk for any hints, Patrick

Re: Different outcome with the same settings

Posted: Sat Sep 23, 2017 7:29 am
by swissdude
here a Pic from under, you can see the light is the same - but one dosent reflect on tha wall?

Thanks, Patrick

Re: Different outcome with the same settings

Posted: Sat Sep 23, 2017 7:48 am
by swissdude
when the render starts, you can imagine some kind of invisible barrier... bute there is nothing there...

Re: Different outcome with the same settings

Posted: Sat Sep 23, 2017 8:43 am
by swissdude
Update - when i turn of the top lights that shine on the grapfics the wall is fine.

any idea?

Thanks!

Re: Different outcome with the same settings

Posted: Sat Sep 23, 2017 1:54 pm
by Support
That's a weird on. Can you PM me the model so I can try it here and see where the problem is?

Re: Different outcome with the same settings

Posted: Sat Sep 23, 2017 3:05 pm
by swissdude
sent, thanks!

This is the best i can get at the momant.

No idea why the walls are not equal

Re: Different outcome with the same settings

Posted: Sat Sep 23, 2017 3:06 pm
by Support
thanks, I'll run some test and I'll get back to you on the PM...

Re: Different outcome with the same settings

Posted: Sat Sep 23, 2017 3:26 pm
by Support
the led lights on the left are duplicated, but strips are, so I deleted the duplicates and now it's rendering fine. I'll run some tests for the wall effects...

Re: Different outcome with the same settings

Posted: Sat Sep 23, 2017 3:50 pm
by swissdude
nice, thx.

i did so much to the model today... i must have some mistakes in it.

this is where i am now, not that bad... do need to run it longer? 800 samples now. the strange thing is i had amazing renders after 3mins, now i need for the same 5h. strage - i must have done something wrong..

Re: Different outcome with the same settings

Posted: Sat Sep 23, 2017 9:58 pm
by Support
I think the duplicates are causing the problem and the slow down. The back strip is also duplicated and so is the red one. So I combined all the yellow one into one strip and grouped it, no dups, and the red one is alone too, grouped as well. 2 lights total for the strips and it works much better and faster. I've set the yellow strip to power=200 and unchecked Low Power. After a few minutes, it looks really nice. oh, I've also removed the texture for the front and back faces of the strips and applied the texture to the group instead.

Re: Different outcome with the same settings

Posted: Sat Sep 23, 2017 11:04 pm
by Support
There is also 2 red lights, I can only find one, even after deleting the duplicates. Must be something else textured the same?

Re: Different outcome with the same settings

Posted: Sun Sep 24, 2017 3:28 pm
by swissdude
Thx, i will chek in a few days.

Cheers