Interested but need help
Interested but need help
Hello,
i'm evaluating raylectron for sketchup from some days and I would need to understand how could be the result of the rendering applied to my project. I'm a designer and i would implement raylectron in my works but i'm not sure about the final result due to my low experience.
I have attached the .rof and configuration. Can you show me a rendering well adjusted?
Thanks in advance
i'm evaluating raylectron for sketchup from some days and I would need to understand how could be the result of the rendering applied to my project. I'm a designer and i would implement raylectron in my works but i'm not sure about the final result due to my low experience.
I have attached the .rof and configuration. Can you show me a rendering well adjusted?
Thanks in advance
- Attachments
-
- bar_p1.rar
- (27.37 MiB) Downloaded 905 times
Re: Interested but need help
ok, let me work on it and I'll get right back to you...
Your support team.
https://SoftByteLabs.com
https://SoftByteLabs.com
Re: Interested but need help
Are you looking for something like this?...
- Attachments
-
- Bar_Locarno.png (1.01 MiB) Viewed 35628 times
Your support team.
https://SoftByteLabs.com
https://SoftByteLabs.com
Re: Interested but need help
Very very a good result!!!
Ok, you convinced me to purchase raylectron.
I think that i'll have to study how to set material effects and so on... let me know if you have some guide to help to learn it well.
Thank you,
Regards
Ok, you convinced me to purchase raylectron.
I think that i'll have to study how to set material effects and so on... let me know if you have some guide to help to learn it well.
Thank you,
Regards
Re: Interested but need help
The Support here is Class A+
I had zero experience and now do crazy renders.
You will love it. patrick
I had zero experience and now do crazy renders.
You will love it. patrick
Re: Interested but need help
Thank you Patrick
Onailuig, I can assist you any time using http://TeamViewer.com and I can show you a lot and it's much faster.
Onailuig, I can assist you any time using http://TeamViewer.com and I can show you a lot and it's much faster.
Your support team.
https://SoftByteLabs.com
https://SoftByteLabs.com
Re: Interested but need help
Just a clarification : i bought a new pc Dell workstation and i have installed sketchup + raylectron (demo).
When i go to raylectron render, i see a slower time of rendering and in the Threads i see only 1 or 2 meanwhile in my old pc i have from 1 to 8... why?
Let me know how to improve the rendering performance.
Regards
When i go to raylectron render, i see a slower time of rendering and in the Threads i see only 1 or 2 meanwhile in my old pc i have from 1 to 8... why?
Let me know how to improve the rendering performance.
Regards
Re: Interested but need help
That's because your new Dell isn't as good as the old one!!! What is the model number of your PC, or better yet, what is the CPU you have in this Dell PC? 2 threads is a thing of the part, even 4.
Your support team.
https://SoftByteLabs.com
https://SoftByteLabs.com
Re: Interested but need help
It's a bad news... the pc bought is DELL Precision T3620 3.4GHz i7-6700, i have also installed a VGA NVIDIA Quadro K620. I hope to have a good pc for interior design rendering.
Let me know your opinion... in the meantime i'm purchasing the Raylectron official version.
Let me know your opinion... in the meantime i'm purchasing the Raylectron official version.
Re: Interested but need help
The i7-6700 is very good, 8 threads so in Raylectron, it should show you 8 threads. Is your Windows report 8 threads also? Look at the Task Manager under Performance.
The Quadro K620 is not good for rendering, only 384 cuda cores, 1500+ is recommended. But it doesn't matter if you use the CPU version. Your video card is very good for Sketchup 2017.
The Quadro K620 is not good for rendering, only 384 cuda cores, 1500+ is recommended. But it doesn't matter if you use the CPU version. Your video card is very good for Sketchup 2017.
Your support team.
https://SoftByteLabs.com
https://SoftByteLabs.com
Re: Interested but need help
It is very strange... i went in task manager and i see only 2 cpu usage and no more... how it's possible... ?!?!?
I will investigate on it... in the meantime i have purchased raylectron by email info@f***service**.it just few minutes ago. i'm waiting for the activation code.
Regards
I will investigate on it... in the meantime i have purchased raylectron by email info@f***service**.it just few minutes ago. i'm waiting for the activation code.
Regards
Re: Interested but need help
You will receive your activation shortly, thank you.
Yes you should investigate, it should show 8 in task manager. What is the CPU it say you have in the Properties of the "Computer" icon?
Yes you should investigate, it should show 8 in task manager. What is the CPU it say you have in the Properties of the "Computer" icon?
Your support team.
https://SoftByteLabs.com
https://SoftByteLabs.com
Re: Interested but need help
I have attached the two screenshot of the details.... i'm so surprised that i don't know what to think...
Re: Interested but need help
It is a great processor... https://ark.intel.com/products/88196/In ... o-4_00-GHz
Have you set the processor affinity on your system? or whoever sold it to you did? It must be set to a single core (2 threads) out of 4 cores (8 threads) and that's why Windows report only 2 not 8.
Have you set the processor affinity on your system? or whoever sold it to you did? It must be set to a single core (2 threads) out of 4 cores (8 threads) and that's why Windows report only 2 not 8.
Your support team.
https://SoftByteLabs.com
https://SoftByteLabs.com
Re: Interested but need help
got to the Start button and type in msconfig and press Enter. In the System Configuration window, click on the Boot tab and then click Advanced Options. Is the "Number of processors" check box checked or unchecked?
Your support team.
https://SoftByteLabs.com
https://SoftByteLabs.com
Re: Interested but need help
In msconfig, advanced boot option the flag is not active. If i activate it the cascade menu has only 1 or 2.... maybe there is something bad configured in the bios i'm thinking, i will try to check or i will get back the workstation to the shop.Support wrote:got to the Start button and type in msconfig and press Enter. In the System Configuration window, click on the Boot tab and then click Advanced Options. Is the "Number of processors" check box checked or unchecked?
Now i have raylectron but i won't have a pc... it's amazing
Re: Interested but need help
Well then yes, it's in the BIOS. It's not that hard to do it yourself. it's all menu driven and most is self explanatory just by looking at the settings. Look for something like "Active processor cores" and set it to "All". I know how it feels, a good PC, no render, or, a render and no PC
Your support team.
https://SoftByteLabs.com
https://SoftByteLabs.com