starting in render

[Thiago]

Hi, my name is Thiago, I'm from Brazil, I discovered your plug-in through sketchup, I'm using your render but I'm having trouble with the image grain, I've seen all the tutorial videos, I wanted to know what I'm doing wrong.The image is good, but some things are not sharp and grainy. I will attach the image.
thank you for your attention

[Thiago]

one of the colleagues who downloaded the file managed to improve it
this was done on reylectron

[GateGirl86]

From my perspective the two images you've post look very good. The composition is spot on. As for the grain issues, I get the same, but how I get around it, is to let the render run overnight. When I come back in the morning, absolutely brilliant. @Thiago pleased to meet you by the way, my name is Melanie.

[Thiago]

It's a pleasure to meet you too.
I'm going to send two images, one that I made and another that a friend made, I didn't leave the rendering for too long, hers comes out brighter. granulated ensem
Tomorrow I will post the settings if you can help me with that
I thank.
The images are good but I can't imitate theirs.
I see some very good images here on the forum
thanks

[Support]

@Thiago Welcome aboard

Another reason you have grains is light settings. I always use 35 as the power and make the Area adjustment higher if I want the light brighter. Also, are you using the Grain Free mode? and for the window, did you place a Portal on its opening outside?

Thank you @GateGirl86 for helping

[Support]

and I just realized that the images are very small, 820x410 and making them bigger will introduce grains. So render then at HD size for better results. Also, I think the material settings need to be adjusted.

[Thiago]

image

[Thiago]

Hi, yes I'm using a portal in the window and this grain free setting and just select it in the lighting tab? Tomorrow I will send a photo of my configuration.
thanks @apoiar

[Thiago]

Tomorrow I will send the settings of these images if anyone can help me I would appreciate it.
Is there no file already configured on a website, on YouTube? from Brazil, however, there is only one channel and it is very superficial on the subject

[Support]

Are both images rendered with Raylectron?

It's not possible to have a setting that works for every model.

[GateGirl86]

@Support "Its what I do."

@Thiago you're most welcome.

As Michael said (Support) a lot of the grain issues, outside of making sure you're running grain free, is with your light settings and I find the best viewport size to use is the 1920*1080 window. That will show you 99% of your errors. But, be patient, you will get there, I promise you that.

[Thiago]

Imagem de hoje

IMG-20231023-WA0013.jpg (214.88 KiB) Viewed 511 times

good morning

Follow the images with my settings.
Is anyone willing to set up a file for me to see

thanks

[GateGirl86]

Rabbits? where?

Você realmente tirou fotos da sua tela?

[Alienizer]

Você realmente tirou fotos da sua tela?

My thoughts too, but he may not know how to take a screen shot.

[GateGirl86]

If he asks me nicely in Portuguese, I'll tell him

[Alienizer]

[Thiago]

good evening, colleagues

All very well?


It was a typo! I didn’t miss out on education!

print Screen? does this exist? hahahaha
of course I know. I was out of time

thanks for nothing

all the best to you

much health

[Thiago]

Are both images rendered with Raylectron?

It's not possible to have a setting that works for every model.

not vray and raylectron
the one I want to copy and the vray one, my colleague uses

[Support]

not vray and raylectron
the one I want to copy and the vray one, my colleague uses

Very confusing. You are not labeling the images so I don't know which is which. The best way to do this is for you to PM me your SKP file and I can make the proper settings for the render and send it back to you.

[Thiago]

not vray and raylectron
the one I want to copy and the vray one, my colleague uses

Very confusing. You are not labeling the images so I don't know which is which. The best way to do this is for you to PM me your SKP file and I can make the proper settings for the render and send it back to you.

sorry for the stupidity but what pm

[Thiago]

rename the image

and the one in the bathroom with the washing machine I did today on raylectron

Thanks you

[Support]

not vray and raylectron
the one I want to copy and the vray one, my colleague uses

Very confusing. You are not labeling the images so I don't know which is which. The best way to do this is for you to PM me your SKP file and I can make the proper settings for the render and send it back to you.

sorry for the stupidity but what pm

Private Message...

[Support]

rename the image

and the one in the bathroom with the washing machine I did today on raylectron

Thanks you

ah ok, this one looks really good, there are still grains but it's nice. What is the problem with this one? You did a good job to it.

[Thiago]

I also thought it was good, but I can't handle all the images.

[Thiago]

rename the image

and the one in the bathroom with the washing machine I did today on raylectron

Thanks you

ah ok, this one looks really good, there are still grains but it's nice. What is the problem with this one? You did a good job to it.

Tomorrow I'll send you a skp for a bathroom
thanks mate

earn double for your help